Follow us on social media
Parklands pool renovation team

Pool Renovations in Parklands for Family Pools in the Wind and Sand

Parklands is flat, sandy and wide open to the summer southeaster, and every pool here knows it. We resurface, reline and repair pools at family homes, security estates and townhouse complexes across Parklands, and sort out the sand problems that come with them.

Parklands marbelite resurfacingFibreglass relining and recoatingPump and filter repairsComplex and estate pools
9+years restoring Cape Town pools
15 to 25year life of a good fibreglass lining
Freesite visit and written quote
1 teamresurfacing, lining and repairs
Pools in the Western Coast Suburbs

Parklands Pool Renovations for Sand, Wind and Busy Summers

Through spring and summer the southeaster blows hard across Parklands, and it carries sand. That sand ends up on the pool floor, in the skimmer basket and in the filter. It scours the surface, it wears pump seals, and if the filter is not keeping up, the water turns dull and grey no matter how much chlorine goes in.

Most Parklands pools are family pools that get used every summer weekend and through the school holidays. Many are the original pools built with the house, and plenty of them are now rough, faded or losing water. They need a proper renovation, not another quick patch.

Marbelite resurfacing replaces a sand-scoured, rough surface with a smooth new coat that is kind on children's feet.
Fibreglass relining and recoating seals concrete pools and brings tired fibreglass pools back to a clean, glossy finish.
Pump, filter and leak repairs so the equipment can handle the sand load and the pool stops losing water.
Renovated blue pool, the finish we aim for with pool renovations in Parklands
Crack repairs and surface preparation during a pool renovation
Underground pool pipe repair after a leak was found
Resurfacing options

Marbelite Pool Resurfacing and Fibreglass Work in Parklands

Parklands has both concrete and fibreglass pools, and each one needs a different approach. We find out what your pool is built from, how worn it is and whether it leaks, then recommend a finish.

Clean white pool finish after a full renovation

Parklands Marbelite Pool Resurfacing

For a concrete pool that has gone rough and patchy, a fresh coat of marbelite is the standard fix. We remove the worn layer, repair cracks and hollow spots, and apply a smooth new finish.

  • Concrete pool re-marbelite
  • Sand-worn surfaces restored
  • Crack and hollow repairs
  • Light and dark colour choices
  • Tile and coping repairs

Fibreglass Pool Relining in Parklands

A fibreglass lining turns a porous concrete pool into a smooth, sealed one that sheds sand and dirt easily. For older fibreglass pools that have gone chalky or blistered, we prepare the old surface and recoat it.

  • Fibreglass lining for concrete pools
  • Recoating faded fibreglass pools
  • Blister and osmosis repairs
  • Smooth, easy-clean finish
  • Choice of gelcoat colours
Pool resurfacing in progress on a drained concrete pool
More than a new surface

Parklands Pool Repairs, Leak Detection and Pool Maintenance

A new finish will not last if the filter cannot cope with the sand or a pipe is leaking under the paving. We look at the whole system and fix it in one go.

Mosaic waterline tiles on a renovated pool

Tiling and Waterline Repairs

Clean new waterline tiles that are easier to keep free of the grey scum wind leaves behind.

  • Waterline tile replacement
  • Loose tile repairs
  • Mosaic step edges
  • Regrouting
Fibreglass pool relining being applied by hand

Pool Shell Repairs

Cracks, hollow spots and broken steps are repaired before any new finish goes on.

  • Crack repairs
  • Hollow-spot repairs
  • Broken step repairs
  • Coping replacement
Pool plumbing repair as part of leak detection work

Leak Detection

We find out whether water loss is from wind evaporation or a real leak, and where it is.

  • Bucket tests
  • Pressure testing
  • Dye tests
  • Pipe repairs under paving
Pool filtration plumbing and valve repair

Filter and Pump Repairs

Sand-heavy pools need a filter and pump in good shape, so we service or replace them as needed.

  • Filter sand replacement
  • Pump seal and bearing repairs
  • Pump replacement
  • Backwash valve repairs
Pool water stored in a bladder on site for reuse after the renovation

Bladder Water Storage

Garden space lets us store most pool water in a bladder and reuse it once the work is done.

  • Bladder set up on the lawn
  • Most water reused
  • Lower water use
  • Quicker swimming again
Completed pool renovation ready for the summer

Pool Maintenance Plans

Regular cleaning and filter care keep sand from wearing down your new finish.

  • Weekly or fortnightly visits
  • Sand vacuumed from the floor
  • Backwashing and filter care
  • Water balancing

Signs your Parklands pool needs work

Book a check if the pool stays dull after cleaning, if the filter needs backwashing far more often than it used to, or if the surface feels like sandpaper.

Sandpaper surfaceDull, grey waterConstant backwashingChalky fibreglassWater lossNoisy pump

Parklands and surrounding suburbs

We work right across the Western Coast Suburbs, including Parklands, Table View, Sunningdale, Bloubergstrand and Milnerton.

ParklandsTable ViewSunningdaleBloubergstrandMilnerton
Planning a Parklands job

Timing Your Parklands Pool Renovations Around the Wind

The southeaster is mostly a summer wind, and a howling day full of sand is not ideal for applying a new finish. That is one reason we suggest booking resurfacing or relining in the cooler months. There are more calm days for the work, and the pool is ready by the time the family wants to swim.

Many Parklands homes are in security estates or sectional title complexes. Estates usually have contractor rules, set working hours and gate access procedures, and shared complex pools need trustee approval. Let us know when you book and we will handle the paperwork and plan around your estate's rules.

Tip from our teamOn windy days, empty the skimmer basket and check the pump basket more often than usual. A basket full of sand and leaves starves the pump of water, and that is one of the most common reasons pumps fail early in this area.
Our process

How Our Parklands Pool Resurfacing Process Works

1

Inspection

We check the surface, tiles, pipes, pump and filter, and test whether the pool is leaking.

2

Clear quote

We explain what needs doing and why, with the finish that suits your pool and budget.

3

Preparation

The pool is drained into a bladder, then the old surface is prepared and repaired.

4

Handover

The new finish is applied, the pool is refilled and balanced, and the equipment is tested.

Before and after

Pool Resurfacing and Relining Results by Aquatic Pools

Parklands FAQs

Parklands Pool Repairs and Renovation FAQs

Sand keeps blowing into our pool. What actually helps?+

A filter in good condition, regular backwashing and emptying the baskets after windy days make the biggest difference. A pool cover helps a lot in summer. A smooth finish such as fibreglass also stops sand from clinging to the walls.

Our fibreglass pool has gone chalky and faded. Can it be fixed?+

Yes. We clean and sand the old fibreglass, repair any blisters or cracks, and apply a new coat. It is far less work than replacing the pool.

We live in a security estate. Can you work with the estate rules?+

Yes. We register with the estate, stick to its working hours and follow the gate procedures. Tell us the rules when you book and we will plan around them.

Is our water loss just the wind?+

Wind does increase evaporation a lot in summer. A simple bucket test shows whether the pool is dropping faster than evaporation explains, and if it is, we do proper leak detection.

When is the best time to renovate a pool in Parklands?+

Autumn and winter are usually best, with less wind and no rush to swim. We work around rainy spells and aim to have the pool ready well before the warm weather.

Book Your Parklands Pool Renovation and Repair Quote

Tell us about your Parklands pool and we will set up a free site visit for resurfacing, relining, leak detection or pump and filter repairs.